clarusScopeHeadder-Edit

ENDOSCOPIC SHUNT PLACEMENT SYSTEM


SEE THE

DIFFERENCE:

-> Reduces cost up to 50%

-> Easier set-up

-> Always in focus

-> Superior optics

-> No optical coupler needed


Description

 

The 3000N Clarus Scope is a flexible fiberoptic endoscope with an outer tip

diameter of 0.91 mm, and a working length of approximately 82 cm. The

2120C cannula has an outside diameter of 1.2 mm and a working length of

15.5 cm.

Indications For Use

 

For accessing and visualizing nerves, neural tissue, and surrounding

tissue where cerebrospinal fluid (CFS) may be contacted during

neurosurgical (including intracranial) procedures.

Intended Use

 

The endoscope is intended to be used with the 2120C cannula.

The endoscope is intended to be reused. The 2120C cannula are

single-use only.

Clarus Scope 3000N Brochure

3000N_Brochure_Thumb200

Technical Specifications

The Clarus Scope (3000N) :

  •        outer tip diameter – 0.91 mm
  •        working length – 82 cm

The 2120C cannula:

  •        outside diameter – 1.2 mm
  •        working length – 15.5 cm

Caution: The protective Sheath must be removed before sterilization. The endoscope is shipped non-sterile and must be cleaned and sterilized before use. DO NOT autoclave the endoscope. Permanent damage to the device will occur.